Headlines 8th Sep 2010











Join the Osmond Electronics newsletter, fill in your details below & press send.





 New

AKG DSR 700 Digital Wireless System



AKG DSR 700 Digital Wireless Receiver



3 Ultra-wide tuning range of 155 MHz
Signal Encryption for prevents unintended signal reception for sensitive applications
2-channel receiver with 19” all-metal case
Digital true-diversity technology
Up to 100 channels can be operated simultaneously
Quick Setup mode, Spectrum Analyzer and Rehearsal functions for easy setup
Infrared link of all frequency and setup data to the transmitter
Transmitter batteries status monitoring
Low-cut filter, 3-band Equalizer, dBx® Compressor and dBx® Limiter included
155 MHz ultra-wide frequency range
The DSR 700 digital true-diversity receiver offers an ultra-wide bandwidth of up to 155 MHz for a robust and most flexible operation. Select the receiving frequency from pre-programmed frequency groups and sub-channels of your receiver or set it directly in 25 kHz-increments. Each pre-programmed frequency group provides up to 40 intermodulation-free channels*. It has a better resistance to interference to provide more channel security and reliable transmission. Using both frequency bands and a customized frequency table allows operation of more than 100 channels simultaneously.

Encryption & digital transmission
Digital transmission makes it possible to broadcast sensitive audio information with absolute confidence. The audio encryption offers you the highest security for, courtroom, boardroom and other confidential meeting applications.
The transmitter uses a digital data stream to transmit battery and mute status to the receiver.

Quick & easy setup
Great attention was paid to ensure an easy and user-friendly operation with a quick setup feature. The receiver will find interference-free channels and transmit the related setup data to the transmitter via infrared.

Environment scan - Spectrum analyzer
The Environment Scan function converts the receiver into a spectrum analyzer. It searches the receiver’s entire frequency band for active radio frequencies and shows them in a frequency spectrum graph in the display.

Digital Signal Processing
The build-in digital signal processor offers a variable low-cut filter, a semi-parametric equalizer, a dBx® limiter and compressor.

* The actual number of channels that can be used simultaneously depends on local frequency plans.

Specifications

DMS 700 Digital Microphone System
Carrier frequency range Band 1: 548.1 to 697.9 MHz
Band 2: 710.1 to 864.9 MHz
Switching bandwidth <= 155 MHz (country-dependent)
Audio bandwidth 25 to 20,000 Hz (±3dB)
THD <= 0.05 %
Signal/noise ratio Analog: XLR balanced typ. 115 dB(A)
Digital: AES3 typ. 120 dB(A)
Audio sampling 24 Bit / 44.1 kHz
Modulation Digital
Bandwidth < 200 kHz
Compression AKG Premium Audio Compression Technology
Latency 4 ms
Encryption yes
Temperature range 14 – 131°F / -10 – 55°C
SYSTEM COMPONENT DSR 700 – Digital True Diversity Receiver
Channels 2 (Dual Receiver)
Sensitivity 10dBμV / -97dBm
Image & spurious rejection >= 95dB
Receiver type super heterodyne
Diversity system digital true diversity
Antenna inputs 2 x 50 ohms BNC female connector
Audio outputs 2 x analog: XLR sockets balanced
2 x analog: ¼ inch / 6.3mm jack sockets unbalanced
1 x digital: AES/EBU XLR socket (48 kHz) with Wordclock IN (BNC, 48 kHz)
Audio output level XLR balanced: +12 dBu (max.)
Low cut 0–300 Hz
Equalizer 3 bands (Parameter: low gain, mid gain, mid frequency, high gain)
Compressor dbx (Parameter: gain, threshold, ratio, attack, release)
Limiter dbx (Parameter: threshold)
Transmitter battery meter 7-digit transmitter battery information
PC interface Ethernet via HUB 4000 Q, HiQnet System Architect Software
Power supply 90–240 VAC, 50-60 Hz, 0.4A
Dimensions Standard 1U-rack
480 x 43 x 200 mm (18.9 x 1.7 x 7.87 in.)
Net weight 2.3 kg (81oz.)

RRP: $3,799.00

AKG DPT 700 Belt Pack

RRP $1799.00



Ultra-wide tuning range of 155 MHz
Signal Encryption for prevents unintended signal reception for sensitive applications
Rugged & compact with all-metal construction
Up to 50mW software selectable RF-output power
8 hours battery life and 7-segment battery status display
Infrared data link
Status data transmission to receiver
Integrated charging contacts for 2 hour quick-charging of rechargeable batteries inside transmitter
Connector for external mute switch
Professional mini-XLR audio input
DPT 700 is a highly-professional bodypack transmitter with a rugged all-metal chassis. The ultra-wide bandwidth of up to 155 MHz and up to 50mW RF output power provides the most flexible operation. An infrared data link will send all setup data to the assigned transmitter. The bright graphic display shows channel, frequency, output power and battery status information.

The DPT 700 has a jack for an optional external mute switch that mutes the audio signal even when the transmitter is not easy to reach. The 3-pin mini-XLR audio input is compatible with any lavalier or headworn microphone and provides a bias voltage of 5V (the connector has to be modified for non-AKG microphones)

The number of channels that can be used simultaneously depends on local frequency plans.

Specifications

SYSTEM DMS 700 Digital Microphone System
Carrier frequency range Band 1: 548.1 to 697.9 MHz
Band 2: 710.1 to 864.9 MHz
Switching bandwidth <= 155 MHz (country-dependent)
Audio bandwidth 25 to 20,000 Hz (±3B)
THD <= 0.05 %
Signal/noise ratio analog: XLR balanced typ. 115 dB(A)
digital: AES3 typ. 120 dB(A)
Audio sampling 24 Bit / 44.1 kHz
Modulation digital
Bandwidth < 200 kHz
Compression AKG Premium Audio Compression Technology
Latency 4 ms
Encryption yes
Temperature range 14 – 131°F / -10 – 55°C
SYSTEM COMPONENT DPT 700 – Digital Bodypack Transmitter
Audio Inputs TB3M / 3-pol. mini-XLR socket (max. 2.2 Vrms)
RF output power 10, 20, 30, 50 mW (ERP max.) software adjustable (country-dependent)
Spurious <= -70 dBc
Antenna ¼-wave antenna
Battery life >= 8 hrs. with 2x 1.5V LR6 AA batteries
>= 8 hrs. with 2x 1.2V AA rechargeable batteries (NiMH, >2100 mAh)
Dimensions 83.5 x 64.1 x 22 mm (3.3 x 2.5 x 0.86 in.)
Net weight 82 g (2.9 oz.) without batteries



AKG DHT 700 Hand Held Microphone

RRP $1799.00 for D5 (Dynamic Version)
RRP $1999.00 for C5 (Condenser Version)



Ultra-wide tuning range of 155 MHz
Signal Encryption for prevents unintended signal reception for sensitive applicationsRugged all-metal construction
Up to 50mW software selectable RF-output power
D 5 or C 5 microphone element
8 hours battery life and 7-segment battery status information
Infrared data link
Status data transmission to receiver
Integrated charging contacts for 2 hour quick-charging of rechargeable batteries inside transmitter
DHT 700 is a professional handheld transmitter with a robust metal body. AKG’s legendary D 5 dynamic and C 5 condenser microphone capsules for lead and backing vocals delivers a powerful sound even on the noisiest stage. The D 5’s patented laminate Varimotion diaphragm and the supercardioid pickup pattern ensure maximum gain-before-feedback.

The ultra-wide bandwidth of up to 155 MHz, up to 50mW output power and the built-in helical antenna provide the most flexible operation. An infrared data link sends all setup data to the assigned transmitter.

The bright graphic display clearly shows channel, frequency, output power and battery status.

The number of channels that can be used simultaneously depends on local frequency plans.

Specifications

DMS 700 Digital Microphone System
Carrier frequency range Band 1: 548.1 to 697.9 MHz
Band 2: 710.1 to 864.9 MHz
Switching bandwidth <= 155 MHz (country-dependent)
Audio bandwidth 25 to 20,000 Hz (±3dB)
THD <= 0.05 %
Signal/noise ratio analog: XLR balanced typ. 115 dB(A)
digital: AES3 typ. 120 dB(A)
Audio sampling 24 Bit / 44.1 kHz
Modulation digital
Bandwidth < 200 kHz
Compression AKG Premium Audio Compression Technology
Latency 4 ms
Encryption yes
Temperature range 14 – 131°F / -10 – 55°C
SYSTEM COMPONENT DHT 700 – Digital Handheld Transmitter
RF output power 10, 20, 30, 50mW (ERP max.) software-adjustable (country-dependent)
Spurious <= -70 dBc
Antenna Built-in helical antenna
Microphone element DHT 700 D 5 – dynamic microphone (super cardioid)
DHT 700 C 5 – condenser microphone (cardioid)
Max. SPL DHT 700 D 5 <= 140 dB/SPL
DHT 700 C 5 <= 140 dB/SPL
Battery life >= 8 hrs. with 2x 1.5V LR6 AA batteries
>= 8 hrs. with 2x 1.2V AA rechargeable batteries (NiMH, >2100 mAh)
Dimensions 231 x 52 mm dia. (9.1 x 2 in.)
Net weight 336 g (11.8 oz

AKG CU 700 charging system

RRP: $799.00




Charging Unit for DPT 700 / DHT 700

2-hour quick charging.
Two slots that fit both DHT 700 and DPT 700.
LED status information
Optional 19-inch rack mount unit

AKG’s CU 700 is a fast charger that rapidly charges the rechargeable batteries inside the transmitter without damaging the cells' elements. The CU 700 charger determines the optimum charge current and has a cooling fan to help keep the temperature of the cells under control.
Charging is terminated when both batteries are fully charged. The CU 700 charger use the pulse technology in which a pulse is fed to the battery. This DC pulse has a strictly controlled rise time, pulse width, pulse repetition rate (frequency) and amplitude. With pulse charging, high instantaneous voltages can be applied without overheating the battery.

Sales Inquiry Click Here






 Other Headlines

Special buy! 6 only available
Proel Flash 12 A Powered Speakers
Great value - special buy $ 690.00 incl GST

FLASH12 is the most versatile model in the Series. It can be used for a wide variety of applications that require speakers to accurately reproduce the whole audio range while delivering quality sound and high efficiency. Thanks to its compact size, exceptional portability and a variety of installation options, FLASH12 is the perfect choice for musicians and small bands, for live monitoring, for portable DJ reinforcement systems, for fixed installation in clubs, bars and disco-bars, and for voice reinforcement systems

Datasheet
System type : 2-way processed active enclosure
Amplifier Continuous Power : 200 W+50 W bi-amp
Input Impedance : LINE: 20 kohm balanced, 10 kohm unbalanced
MIC: 2 kohm balanced, 1 kohm unbalanced
Frequency response : 50 Hz - 20 kHz
Sensitivity : 98 dB @ 1 W/1 m
Input Sensitivity : LINE: 0 dBu / 0.775 V
MIC: max -35 dBu
Low Frequency Device : 12'' woofer
High Frequency Device : 1'' compression driver Titanium diaphragm
Crossover Frequency : 2000 Hz
Low frequency equalizer : 100 Hz +6 dB, -6 dB shelving
High Frequency Equalizer : 8 kHz +6 dB, -6 dB shelving
Angolar coverage : 90° H x 60° V
Monitor Taper : 42°
Power Supply : 230 VAC 50Hz or 117 VAC 60 Hz
Maximum Power Consumption : 390 VA
Cooling : Natural convection (safety protection 65°)
Connectors : IN: combo, XLR F
LINK: XLR M
Construction : injection reinforced hi-density polypropylene
Mounting Pole : 1 x bottom
Flying System : 4 x M10 - top, bottom
Weight : 20 kg(44.100lb )
Dimensions (W x H x D) : 39 x 63 x 36 cm
Controls : mic level, line level, low eq., hi eq., gnd lift
New
Ribbons for every occasion
Audio Technica AT4080 & AT4081

With the groundbreaking AT4080 and AT4081, Audio-Technica has achieved the coveted ribbon microphone sound while
solving the problems of fragility and low output that have historically plagued ribbon mics.

Equally at home in recording studios or live-sound settings, these all new microphone feature Audio-Technica’s innovative
MicroLinear™ ribbon imprint, which protects the dual ribbons from lateral flexing and distortion.

With 18 patents pending, Audio-Technica’s innovative ribbon transducer advances the evolution of ribbon microphone
design. They are the company’s first ever ribbon mics and offer smooth, natural, articulate audio quality that meets the
critical requirements of today’s recording, broadcast and sound reinforcement professionals.

The AT4080, with an appearance like a classic ‘suspension cradled’ side-addressed condenser, is recommended for vocals,
horns, strings, acoustic instruments, drum overheads, orchestras, ensembles and guitar cabinets. The AT4081, which looks
more like a pencil condenser, is optimised for strings, saxophones and other horns, acoustic instruments, drum overheads,
orchestras, ensembles and guitar cabinets; its low-profile stick design maximises placement options. Both mics excel in
recording studios as well as in live-sound settings.

Extremely powerful N50 rare-earth neodymium magnets provide high output levels, and the mics’ innovative dual ribbon
construction offers increased sensitivity and SPL handling capability. Both microphones require 48V phantom power to drive
their active electronics which enable them to deliver output close to condenser microphone levels.

Each is handmade in Japan, including ribbon corrugation, imprint and assembly and like all 40 Series microphones, each and
every AT4080 and AT4081 is individually tested and inspected for 100 percent quality assurance.


Retail prices for the AT4080 and AT4081 are $1,295 and $995 respectively.
Just added to our inventory
Klark Teknik introduces the DN 9696 High Resolution Recorder
Extremely easy to use, simple to setup, standalone .......
The concert sound industry is constantly evolving. Bands and artists are increasingly being recorded for live CDs, DVDs, Internet releases and for general archive purposes; all are extremely valuable additional revenue streams for both the artist and service companies alike.
Secondly, with limited production rehearsals now being the norm, mix engineers require live recordings so that a “virtual sound check” can be performed. This removes the need to directly involve the artist, and all the associated additional expense and time that a traditional sound check or rehearsal process incurs. The “virtual sound check” also allows the mix engineer the time to fine tune his mix and use the full potential that digital console automation offers.
To help meet the concert sound industry’s requirements, Klark Teknik has engineered an extremely easy to use, simple to setup, standalone hard disk recorder - the DN9696. This High Resolution Audio Recorder offers 96 tracks of 96kHz audio at 24bit, with a massive nine hours of internal storage. There is now no need for external computers linked to multiple non-roadworthy systems with complicated interconnections, just a
simple plug and play unit with dedicated Play, Stop and Record front panel transport controls.
The screen based software interface offers in-depth control of both recording and playback functions. There are echoes of the unique features of Midas’ digital audio systems within the DN9696, for example the use of POPulation groups to view, colour and edit tracks, an ‘Input Sheet’ for quickly naming all tracks as well as ‘dual operator’ control of the system.
The DN9696 occupies only 5U of rack space with very simple cable requirements and does not demand the expense of a dedicated recording technician. After all, all you really need is Record, Stop and Play.
Overview
Simple transport controls
96 tracks
96kHz audio
24-bit resolution
9 hours of internal storage
Mirrored drive capability
BWAV audio files
5U
DN9696 Technical Specifications
Front panel description
96 x 4 LED input meters
96 x Yellow ‘SOLO’ LED indicators
96 x Red ‘ARM / REC’ LED indicators
4 x ‘SELECT’ switches
8 x Pairs of AES50 status LED indicators
1 x Time display (8 x Blue 7 segment displays)
1 x ‘TIME’ display mode select switch
3 x Blue LED time display mode indicators
3 x Transport switches, ‘PLAY’, ‘STOP’ and ‘RECORD’
3 x Marker switches ‘SET’, ‘BACK’ and ‘FORWARD’
1 x ‘SOLO’ switch
1 x ‘SOLO’ encoder
1 x Headphone rotary level control
1 x Headphone output (1/4” jack)
1 x Footswitch input (1/4” jack)
4 x Pairs of Hard Drive status LED indicators (2 x internal, 2 x external)
2 x USB 2.0 (type ‘A’) connectors
1 x Klark Teknik Tufflex roundel with Blue LED illumination
1 x Recessed ‘POWER’ switch
Rear panel description
8 x AES50 Connectors - Neutrik Ethercons with status indication
1 x Linear Time Code Input - Neutrik B Series Female XLR
1 x DVI-I Output (or VGA Output with optional adapter)
1 x VGA Output
2 x Firewire 800 Connectors (Minimum)
2 x eSATA Connectors (Minimum)
All other ATX Motherboard connectors will vary depending on the Motherboard used, but will include 2 x PS2 or 2 x USB 2.0 connections for a keyboard and mouse (KVM)
2 x USB 2.0 For archiving
1 x Mains Switch (part of the ATX Power Supply)
1 x IEC Power inlet (part of the ATX Power Supply)
Power Requirements
Voltage 100V a.c. to 240V a.c. ±10%
Frequency 50Hz to 60Hz
Consumption
New in Rental or Sale
ARX USB DI
The mini jack was never meant to be a pro connector

In response to many requests from users of our original USB DI who have been using it for specific applications, ARX is excited to present the new ARX USB DI-VC - everything that the original USB DI was, with the addition of an output level control. It is still a true Plug and Play digital to analog pro audio interface, removing the need to use any existing sound card outputs, but now the output level can be modified quickly and accurately..

Naturally it still features full transformer balanced output isolation to eliminate earth loops / ground hum and other extraneous interaction noise and distortion.
The addition of the volume control allows the USB DI-VC to be used without a mixer. This is a very useful option when driving active loudspeakers from a laptop - the level control lets you reduce the level instantly to suit the required SPL, which still retaining an excellent signal-to-noise ratio.
Plug and Play
The USB DI-VC installs as a fully compatible generic USB audio device, requiring no special driver program installation on Mac OSX, Win XP and Vista.
The rear panel has a Type B USB input connector while the front panel has an Output Level control and two transformer balanced analog audio XLR Line out connectors for connecting to any standard balanced analog input.
A status LED on the rear panel next to the USB Input indicates that the USB DI-VC is connected and operating.
The USB DI-VC is housed in a heavy duty all-steel chassis finished in attractive matt textured powdercoat, with hardwearing epoxy screen printing and slip resistant rubber pads. It is ideal for interfacing any USB equipped computer (especially notebook computers) with the balanced inputs of professional sound systems.
Security features include Kensington®-type computer lock slot and optional bracket kit for under-table mounting. $345.00 INC RRP
Special
SPECIAL PURCHASE EV PLDK4 DRUM PAK
$629.00 RRP - LIMITED STOCK! $490.00 incl GST
The PL DK4 is a ready-for-the-gig microphone solution for a four-piece drum kit containing one PL33 dynamic, supercardioid, kick drum mic, and three PL35 dynamic, supercardioid, tom/snare mics. The PL DK4 is packaged in a high-quality, firm-exterior 600 Denier nylon gig bag with shoulder strap.
Features: The PL33 dynamic, supercardioid, kick drum mic delivers tight low-end and punctuation for kick drums and low-frequency instruments. The PL35 dynamic, supercardioid, tom/snare mic, with its unique body design, integrated swivel, and drum rim clamp is voiced for exceptionally natural tom/snare sounds.
Sales Inquiry Click Here
Now available
New from LSC the Redback series dimmers
The concept behind the Redback project was to produce a feature rich, high quality and reliable dimmer in a small compact footprint at a very affordable price. After extensive development and product testing, we can confidently say we have delivered these objectives. The range is designed for mass manufacture, hence minimising labour content, increasing our economies of scale and reducing the overall build price without compromising quality. It is, undoubtedly, one of the best dimmers designed and manufactured by LSC in its 30 year history.
The Redback dimmers released last year are 6-channel units, a product range not previously manufactured by LSC. The 12-channel variants will now replace the successful ePAK and iPAK range of dimmers that have become benchmarks within the Australian Lighting Industry for the last 10 years. Note that the ePRO and iPRO dimmers will continue.
The Redback 12 channel dimmers are designed to be class leaders, and so are fully compliant with the new RDM (Remote Device Management) protocol, allowing remote configuration from any RDM compatible controller. This new functionality will also soon be available as a free software update for all existing 6-channel Redback dimmer racks.
The Redback dimmer range, like all of the LSC product range, is certified as a "Product of Australia". This means that it is completely manufactured in Australia, NOT just assembled out of imported modules. This ensures the highest level of local content, resulting in LSC's legendary reliability - not to mention local jobs.
Specifications
Power Input
Nominal 220-240 Volts. 3-phase star. 50-60Hz
Operating range typically 190-260V, 45-65Hz.
Choice of input connectors — 2 x 32A 5-pin Clipsal style plugs and 2m 3-phase tails or - One set of 5 x 400A Powerlocks. control input
DMX512 (all versions) via Front panel-mounted 5-pin XLR in and thru connectors.
Optional wireless DMX input (W-DMX or SHoW DMX).
5-way DMX Data splitter with fully isolated (to 1500V) outputs via Front panel-mounted 5-pin XLR connectors.
LSCnet via Front panel-mounted RJ45 Ethercon in and thru connectors.
Output
13A max per channel protected by 6kA rated thermal magnetic miniature circuit breaker (MCB).
LSC’s proprietary Current Control Technology (CCT) protects all MCBs from nuisance tripping.
Pulse Transformer Fired Dimming (PTFD) - ability to control inductive and lower powered loads.
Duty Cycle rated at 100% across all channels simultaneously at 25˚C ambient.
Three 13Amp single phase auxiliary 3-pin outputs with MCB protection.
Patch Bays have a choice of GST18 serial/parallel dimmer patch or GST18 parallel dimmer patch.
• The GST18 serial/parallel dimmer patch model provides two series dimmer (120V), two
parallel dimmer (240V) and two HotPower 3-pin sockets per channel (24 sets in total).
• The GST18 parallel dimmer patch model provides four parallel dimmer (240V) and two
HotPower 3-pin sockets per channel (24 sets in total).
Four optional socket output panels are available:
• Socapex Tail Patch comprising Eight 19-pin Socapex 6-circuit connectors hard-wired to forty-
eight 3-pin GST18 plugs and leads.
• Harting Tail Patch comprising Twelve 10-pole Harting 4-circuit connectors hard-wired to forty-
eight 3-pin GST18 plugs and leads.
• Harting Tail Patch comprising Twelve 10-pole Harting 5-circuit connectors hard-wired to sixty
3-pin GST18 plugs and leads.
• Harting Tail Patch comprising Eight 16-pole Harting 6-circuit connectors hard-wired to forty- eight 3-pin GST18 plugs and leads.
Functions

LCD touchscreen for configuration and operational display such as output levels for each channel,
error logging and reporting and whether control is from DMX512 or memory mode.
Minimum and Maximum level settings per output channel.
Full 512-channel proportional softpatch allowing any channel to be controlled from any DMX slot.
Seven dimmer curves selectable per channel.
Large Bi-Colour status LED providing system OK, error or fail indications.
Internal memory storage of up to 80 scenes.
Simple control of internal memories via LSC ePlates (button of fader models available) to allow
easy stand-alone operation by non-technical people. Ideal for trade shows or corporate events.
Remote status reporting via LSC Houston software connected to the LSCnet.
Mechanicals
Overall flightcase dimensions—680mm wide x 780mm high x 730mm deep (inc. wheels)
Actual weight = 62kgs. Shipping weight = 84kgs
Construction:
Flightcase — Hexagrip ABS clad marine ply with aluminium extrusion tongue and groove edging
fitted with heavy duty catches, lockable wheels and handles.
Internal Frame — removable corrosion resistant zinc steel, finished in black powdercoat with
rear screened durable polycarbonate labels.
peace of mind
24 month warranty on parts and labour.
Free for Life Product software updates via CodeLink Port.
100% designed and manufactured in Australia by an Australian Owned company.
CE and C Tick approved.
Sales Inquiry Click Here

View ALL Headlines

Home . Rentals . Sales . Production . Services . Installations . Terms and Conditions . Contact Us . Site Map
Copyright 2009 Osmond Electronics . Website Designed and Built by Beyond Imagination Entertainment